features - high reliability for low cost - temperature stability of +-1 ppm available - excellent phase noise performance - low power consumption - cheapest available leaded smd-tcxo in metal package series package clipped sine wave vs. temperature vs. supply voltage vs. load vs. aging operating temperature range storage temperature range voltage current voltage standard option external control voltage 10 hz offset from carrier 100 hz offset from carrier 1 khz offset from carrier 10 khz offset from carrier 100 khz offset from carrier pin 1 pin 2 pin 3 pin 4 load output frequency stability pin connection signal frequency adjustment phase noise (typical) input petermann-technik | amselweg 8 | d-86916 kaufering fon: 00 49 (0) 81 91 / 30 53 95 | fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | info@petermann-technik.de other parameters are available on request / create here your specification +-1 ~ +-5 ppm +-0.5 ppm max. / 5vdc +-5% +-0.2 ppm max. / 10 pf ~ 20 pf +-1 ppm max. per year M4511 smd-package 11.4 x 9.6 x 2.5 mm3 10.0 ~ 51.84 mhz +-3 ppm min. per internal trimmer -40/+85c 3 ma max. 1.0 v peak to peak min. -0/+50c ~ -40/+85c 2.5 vdc +-2 vdc -145 dbc/hz -80 dbc/hz -105 dbc/hz -130 dbc/hz +-5 ppm min. by external control voltage +5.0 vdc +-5% case ground output supply voltage - extended temperature range to -40/+85c available clipped sine wave frequency range not connected or control voltage -150 dbc/hz 10 k ? / 10 pf petermann technik time & frequency components
petermann technik time & frequency components petermann-technik | amselweg 8 | d-86916 kaufering fon: 00 49 (0) 81 91 / 30 53 95 | fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | info@petermann-technik.de part numbering guide example M4511-2.5-s-j-10-s-v-27.000mhz-t series M4511 5 = 5 mm package height package height 2.5 = 2.5 mm package height s = clipped sine wave t = on demand output signal h = on demand j = 0/+50c n = -10/+60c x = 0/+70c m = -20/+70c k = -30/+75c temperature range w = -40/+85c 10 = +-1.0 ppm 15 = +-1.5 ppm 20 = +-2.0 ppm 25 = +-2.5 ppm 50 = +-5.0 ppm stability vs. temperature x = other value - please indicate your required value blank = tcxo vctcxo option v = 2.5 +-2.0 vdc for +-5 ppm min. frequency frequency in mhz tape and reel package -t outline drawing M4511 1.0 7.62 2.0 8 . 3 5 1.5 #1 #4 #3 #2 #1 #4 #2 #3 0.8 - - - h #1 mark h1 = 5.0max h2 = 2.5max { h connection pin #1 #2 #3 #4 n.c. or control voltage ground output v dd unit:mm
petermann technik time & frequency components petermann-technik | amselweg 8 | d-86916 kaufering fon: 00 49 (0) 81 91 / 30 53 95 | fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | info@petermann-technik.de test circuit for clipped sine wave test point + - ma m vm power supply + - + - 0,1f oscillator out gnd #1 #2 #3 #4 c =10pf l n.c. or control voltage note: cl includes probe and fixture capacitance v dd 10k test circuit for hcmos (on demand) test point + - ma m vm power supply + - + - 0,1f oscillator out gnd #1 #2 #3 #4 c =15pf l note: cl includes probe and fixture capacitance v cc test circuit for ttl (on demand) test point + - ma m vm power supply + - + - 0,1f oscillator out gnd #1 #2 #3 #4 1n4148 or equiv n.c. or control voltage note: cl includes probe and fixture capacitance v dd r=390 l c=15pf l clipped sine wave output signal 0.0v dc v 1v min p-p clipped sine wave reflow solder profile 240c 150c 25c reflow 240c max. time 1 - 2 minutes 10s max. 4c/s max. t e m p e r a t u r e cooling
|
